Elegoo
0102030405
ELEGOO Mars 4 DLP with Ultra-Quiet Printing, 20000+ Hours Service Life, and Ultra-Low Operating Power 3D Printer
DESCRIPTION
【Low Power & Ultra-quiet Printing】12W ultra-low operating power is energy-saving and eco-friendly, with about 1/7 energy consumption of LCD printers. Since lower power consumption generates less heat, there is no need for a cooling fan to dissipate heat, reducing print noise below 48 dB.
【More Stable Structure】The Z-axis linear rail is thickened from 15mm to 20mm, which effectively reduces the vibration amplitude during Z-axis movement and the layer pattern of printed models for better final print results. Sandblasted surface build plate with strong adhesion to improve the printing success rate.
【Smart Voxeldance Tango Slicer】Three printing modes are optional: static mode and dynamic mode (including smooth and high-speed mode). In dynamic mode, the slicing software will dynamically adjust the printing speed by the cross-sectional size of the printed model to reduce the impact of the release force, thereby improving the printing efficiency. In addition, ELEGOO self-developed a new open-source GOO slicing format, which is compatible with multiple slicing software without restriction.
description2
characteristic
-
SYSTEM: EL3D-3.0.1SLICER SOFTWARE: Voxeldance Tango, ChituBoxTECHNOLOGY: TI (Texas Instruments) DLP technologyLAYER THICKNESS: 0.01-0.2mmPRINTING SPEED: 30-70mm/hZ AXIS ACCURACY: 0.00125mmXY RESOLUTION: 0.05mm(2560*1440)BUILD VOLUME: 132.8mm(L) *74.7mm(W) *150mm(H)WEIGHT: 15lbs(6.8kg)
-
LIGHT SOURCE: TI (Texas Instruments) DLP ProjectorLANGUAGES: Chinese, English, Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish, PortugueseCONNECTIVITY: USBOPERATION: 3.5 Inch Touch ScreenPOWER REQUIREMENTS: 100-240V 50/60Hz 12V1.5A 18WPRINTER DIMENSIONS: 24.6cm(L) *23cm(W) *45.3cm(H)
description2
Advantage
Digital Light Processing (DLP) uses a digital light projector to directly project the entire layer image to the bottom of the resin tank, with the UV beam selectively projected by a digital micromirror device (DMD) onto the given position to be cured.
ELEGOO DLP projector adopts the LG high-performance LED light source + 13-layer lens set design, with light intensity up to 4mw/cm2 and light uniformity up to 95%, coupled with 95% light transmittance tempered glass, which minimizes light scattering and light bleed. The result is greater print accuracy than LCD 3D printers with the same resolution.
Greater Print Accuracy
ELEGOO DLP projector adopts the LG high-performance LED light source + 13-layer lens set design, with light intensity up to 4mw/cm2 and light uniformity up to 95%, coupled with 95% light transmittance tempered glass, which minimizes light scattering and light bleed. The result is greater print accuracy than LCD 3D printers with the same resolution.
Voxeldance Tango Software
It offers three printing modes: static mode and dynamic mode (including smooth mode and high-speed mode). In dynamic mode, when the cross-section of the printed model is small, the print lifting speed is faster, thereby increasing the printing efficiency; conversely, the printing speed will slow down.
Besides, ELEGOO has self-developed a new open-source GOO slice format, which is compatible with third-party slice software, such as CHITUBOX and Lychee Slicer.
NEW ALGORITHM
Combined with the full grayscale anti-aliasing algorithm, you can print crisp detailed models with a minimum aperture of 0.2mm and a minimum cylinder of 0.25mm.
description2
details
description2
faq
Hi Does the Mars 4 DLP projector have 2k resolution or is 2k achieved mechanically and the resolution of the projector itself is smaller?
Hi, Thanks for your contact and interest in the Elegoo product. The DLP projector itself has 2K resolution. Kind regards
2.Replacement resin tanks and fep films for Mars 4 DLP were supposed to be available in third quarter, but I can't find them anywhere. Are they available?
Hi, thanks for your contact and interest in the Elegoo product. The spare parts will be sold later. You could subscribe to our official website(https://www.elegoo.com )or follow our Facebook(https://www.facebook.com/ELEGOOOfficial) to get the newest information. If you need to use it urgently, pls contact us at this email: 3dp@elegoo.com. Our technical support will help you check issue and give you a quotation. Best regards
If i buy the new Mars 4 printer do I need wasting and curing equipment as well? trying to figure out if this is a need or something you dont need with this printer?
Hi, thanks for your contact and interest in the Elegoo product. Using washing and curing machine to work together can be more time efficient and also more convenient. If you are interested in it, pls have a look at our store to select. If you have any other issue, pls contact us at this email: info@elegoo.com. Best regards